Thermal protection for electric motors, transformers, battery packs and small appliances
Thermostats and thermal cut-outs, thermal switches, one-shot
bimetals and self-hold protection devices are all
available from the UK's market leaders.
ATC Semitec Products
• NTC Thermistors • PTC Thermistors • Temperature Sensors • Platinum Sensors/Pt100s • Thermostats/Thermal Cutouts • Disc Thermostats • Precision Thermostats • Adjustable Thermostats • Thermal Fuses • PTC Resettable Fuses • Circuit Protection Devices
PEPI thermostats provide accurate temperature control and thermal protection from 5°C to 200°C. With calibration tolerances of ±3K and temperature differentials as small as 10K (or even smaller in creep-action designs) a PEPI thermal switch offers the best control to cost ratio available.
Thermal control and over-temperature protection is provided by a wide variety of PEPI thermal cutouts including some of the smallest safety switches around. The latest PEPI FCP and PEPI ST01 thermal protectors offer combined thermal/current overload protection and can readily switch up to 8A/250VAC or 12A/24VDC.
One of PEPI's neatest designs is an integral "self-hold" thermal and current sensitive cut-out, the model JS. The PEPI JS protector latches open after tripping and is then reset remotely, thus offering the same benefit as fitting a manual-reset cut-out but without the disadvantage of having to access it.
All PEPI thermostats and thermal protection devices carry a range of full international safety approvals (e.g. VDE, UL, CSA) to the latest EN and IEC standards.
Universal close-control bimetal thermostat with calibrations from 5°C to 200°C. Suitable for AC and DC applications.
Small snap-action FCP thermal cut-outs from 50°C to 130°C with plastic housing. Contact ratings to 8A/250VAC.
Snap-action control thermostat for 240/120V AC loads. Perfect for small appliances and electric heater control.
Customisable thermal protectors from 60°C to 160°C. Ideal for electric motor, transformer and lighting ballast protection.
Mini thermostats for small spaces e.g. inside rechargeable batteries. Also normally-open types for alarm activation.
Snap-action battery protector in ultra-small plastic case. Low internal impedance with nickel straps for spot-welding.
A self-hold thermal protector for use on 240 or 120 VAC loads. The PEPI J(S) is available from 60°C to 160°C and has a built-in resistor that only allows it to reset once the applied load is removed. Perfect for protecting small appliances, electric motors, transformers and heating elements.
Click for more info