You can be sure that you found the right partner
NTC and PTC thermistor, thermostat and thermal cut-outs,
thermal fuses and other circuit protection devices are all available from
one competent and reliable source.
ATC Semitec Products
PEPI thermostats can offer accurate temperature control or over-temperature protection from 5°C to 200°C. With tolerances of ±3K and differentials as small as 10K (or even smaller in the creep-action designs) a PEPI thermostat offers the best control/cost ratio available anywhere.
Thermal and current protection is provided by a wide variety of PEPI designs with some of the smallest safety cut-outs available in the world. The latest model FCP also offers combined thermal/current protection and despites its size, can switch up to 8A/250VAC.
One of PEPI's neatest designs is an integral "self-hold" thermal/current cut-out (model JS) that latches after tripping and will allow you to reset it remotely. This offers the benefits of fitting a manual-reset cut-out without the usual disadvantage of having to access it.
All PEPI thermostats carry international standards approvals (e.g. VDE, UL, CSA) and using sophisticated manufacturing techniques, PEPI ensure consistent product quality.
PEPI's service ethic is second to none and is fundamental to their continuing success.
PEPI C & CR Series
|
PEPI FCP Series
|
PEPI J(A) Series
|
PEPI J Series
|
PEPI N & NR Series
|
PEPI V & VA Series
|
Universal creep-action thermostat/thermal protector. Available from 5-200°C.
Click for more info
Ultra-small snap-action thermal control with plastic housing. Rated to 8A/250VAC.
Snap-action thermostat for use on 240/120 VAC loads. Perfect for small appliance and heater applications
Snap-action thermal & current protectors for use up to 277 VAC. Suitable for motor & transformer protection.
Miniature thermostat design for use where space is a premium e.g. re-chargeable battery packs
Snap action thermal protector in ultra-small plastic case.
Very low internal impedance.